{"title":"Heat Pump","description":null,"products":[{"product_id":"ph3e60n00s21-york-5-ton-13-4-seer2-r-454-lx-series-package-heat-pump","title":"York 5 Ton 13.4 SEER2 R-454 LX Series Package Heat Pump","description":"\u003cp\u003eThe York PH3E Packaged Heat Pumps are designed for outdoor installation. Only utility and duct connections are required at the point of installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Efficiency - All PHE4 heat pump models are rated at 14.0 SEER, 11.0 EER and 8.0 HSPF for cooling and heating operation.\u003c\/li\u003e\n\u003cli\u003eOperating efficiency: All PH3 heat pump models are rated at 13.4 SEER2 and 6.7 HSPF2 for cooling and heating operation. \u003c\/li\u003e\n\u003cli\u003eOn-site flexibility: All model sizes use a compact design cabinet in one of two footprints. This provides installer flexibility for placing the correct capacity unit on roof curbs, equipment pads, or concrete slabs with the smallest footprint after the internal load has been determined. Field-convertible duct connections from side shot to down shot allow the installer to have greater flexibility with less inventory. \u003c\/li\u003e\n\u003cli\u003eLower installation cost: Installation time and costs are reduced by easy power wiring and control wiring connections. The small base dimension means less space is required on the ground or roof. All units are completely wired, charged with R-454B, and tested before shipment. Test stations using a state-of-the-art computerized process system are used to ensure product quality. Refrigerant charge and component part numbers are verified using computer bar code scans during assembly. Vital run test statistics such as system pressures and motor currents are monitored and recorded by the system to ensure unit performance. Equal size side supply and return duct connections allow easy connection of ducts to match low crawl spaces without transition pieces. \u003c\/li\u003e\n\u003cli\u003eUtility connections made easy: Electric utility access is provided through the bottom or the side of the unit. Utility connections can be made quickly and with a minimum amount of field labor. A field-supplied electrical disconnect switch must be field installed. \u003c\/li\u003e\n\u003cli\u003eConvertible airflow design: The bottom duct openings are covered when they leave the factory, ready to be used for a side supply and side return application. If a bottom supply and bottom return application is required, remove the two panels from the bottom of the unit and place them in the side supply and side return duct openings. No panel cutting is required and no accessory panel is necessary. The convertible airflow design allows for maximum field flexibility and minimum inventory.\u003c\/li\u003e\r\nCondensate pan: A corrosion-resistant, long-lasting, watertight pan is positioned below the indoor coil to collect and drain all condensate, preventing build-up of stagnant condensate. The condensate pan conforms to ASHRAE 62-19 standards - Ventilation for Acceptable Indoor Air Quality. \n\u003cli\u003eCondensate drain: The 3\/4 in. NPT female connection is rigidly mounted to ensure correct fit and a leaktight seal. \u003c\/li\u003e\n\u003cli\u003eDurable finish: The cabinet is made of G90 galvanized steel with a powder paint coating for appearance and protection. The pre-treated galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. The powder paint finish ensures less fading when exposed to sunlight, and provides superior corrosion resistance. The powder paint finish is 1,000 h salt spray tested. \u003c\/li\u003e\n\u003cli\u003eFull perimeter base rails: The easily removable base rails provide a solid foundation for the entire unit and protect the unit during shipment. The rails provide forklift access from all sides, and rigging holes are also provided so an overhead crane can be used to place the units on a roof. On applications where the unit is placed on an equipment pad, the base keeps the unit off the equipment pad to deter corrosion. On applications where height is limited, the base rails can be removed by removing two screws in each corner. \u003c\/li\u003e\n\u003cli\u003eAttractive appearance: The single-piece top cover contains a top-discharge outdoor fan arrangement. The one-piece design adds greater water integrity. Rounded corners with water drip edges add to the attractive appearance. \u003c\/li\u003e\n\u003cli\u003eTop discharge: The top-discharge outdoor fan does not disrupt neighboring areas or dry out vegetation surrounding the unit. The warm air from the top-mounted fan is blown up and away from the structure and any landscaping. \u003c\/li\u003e\n\u003cli\u003eOutdoor coil grille: All models use a stamped slotted design that provides superior impact protection against small objects during transit and after installation. \u003c\/li\u003e\n\u003cli\u003eLow operating sound level: The upward airflow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates noise. The isolator mounted compressor and the louvered fins of the outdoor coils muffle the normal fan motor and compressor operating sound. The unique formed base pan also aids in sound attenuation with its structural design. \u003c\/li\u003e\n\u003cli\u003eFan system: All models operate over a wide range of design conditions with a standard ECM indoor blower motor. These units easily suit all types of applications and provide greater on-site flexibility to meet comfort requirements. The cooling and heating speeds are factory set at test design conditions but can be field adjusted. This allows for maximum comfort capabilities. \u003c\/li\u003e\n\u003cli\u003eLoss of charge switch: All models include a loss of charge switch to provide safe shutdown of the compressor. \u003c\/li\u003e\n\u003cli\u003eSimple control circuit: A printed circuit board contains a status and diagnostic indicator light. Units have a factory installed refrigerant detection system (RDS) and field thermostat wiring connects to the RDS screw terminals. Cooling controls use contactor and relays for simple application and troubleshooting. MATE-N- LOK plug connectors are used. The electrical control box is not located in the compressor compartment. The controls are mounted to allow removal of the separate access panel for troubleshooting and maintenance without affecting the normal system operating pressures. All wiring internal to the unit is color-coded and numbered. \u003c\/li\u003e\n\u003cli\u003eProtected compressor: The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high-pressure relief valve and a temperature sensor, which protects the compressor if unsuitable operating conditions occur. \u003c\/li\u003e\n\u003cli\u003eHigh-pressure switch: A high-pressure switch is standard in all units. When abnormal conditions are sensed through the high-pressure switch, the unit locks out, preventing any further operation until it is reset or the problem is corrected. \u003c\/li\u003e\n\u003cli\u003eExclusive coil design: The grooved copper tubes and enhanced aluminum fin construction of the outdoor coils improve heat transfer for maximum efficiency and durability. Indoor tube and fin coils have all aluminum construction for reliability and efficient heat transfer. \u003c\/li\u003e\n\u003cli\u003eLow maintenance: Long-life, permanently lubricated indoor blower motor bearings and outdoor fan motor bearings need no annual maintenance, adding greater reliability to the unit. The slide-out blower assembly and indoor coil assembly can be easily removed for cleaning. \u003c\/li\u003e\n\u003cli\u003eEasy service access: Individual access panels provide access to all major components, for example, the compressor, indoor coil, blower, controls, electric heat kit, and air filters, making servicing easy. Removing these panels allows easy removal of components such as the blower assembly for maintenance and troubleshooting. \u003c\/li\u003e\n\u003cli\u003eReplacement parts: The installer requires no special training to replace any of the components of these units. The number of new components has been reduced to minimize the inventory of unique parts. \u003c\/li\u003e\n\u003cli\u003eControls: Defrost curve options are preloaded into the demand defrost control board for optimized performance based on unit capabilities. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577587732545,"sku":"PH3E60N00S21","price":5418.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-phe_1_23c6d16d-d340-4fa0-87b3-67724d3564d4.png?v=1790725982"},{"product_id":"ph3e48n00s21-york-4-ton-13-4-seer2-r-454-lx-series-package-heat-pump","title":"York 4 Ton 13.4 SEER2 R-454 LX Series Package Heat Pump","description":"\u003cp\u003eThe York PH3E Packaged Heat Pumps are designed for outdoor installation. Only utility and duct connections are required at the point of installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Efficiency - All PHE4 heat pump models are rated at 14.0 SEER, 11.0 EER and 8.0 HSPF for cooling and heating operation.\u003c\/li\u003e\n\u003cli\u003eOperating efficiency: All PH3 heat pump models are rated at 13.4 SEER2 and 6.7 HSPF2 for cooling and heating operation. \u003c\/li\u003e\n\u003cli\u003eOn-site flexibility: All model sizes use a compact design cabinet in one of two footprints. This provides installer flexibility for placing the correct capacity unit on roof curbs, equipment pads, or concrete slabs with the smallest footprint after the internal load has been determined. Field-convertible duct connections from side shot to down shot allow the installer to have greater flexibility with less inventory. \u003c\/li\u003e\n\u003cli\u003eLower installation cost: Installation time and costs are reduced by easy power wiring and control wiring connections. The small base dimension means less space is required on the ground or roof. All units are completely wired, charged with R-454B, and tested before shipment. Test stations using a state-of-the-art computerized process system are used to ensure product quality. Refrigerant charge and component part numbers are verified using computer bar code scans during assembly. Vital run test statistics such as system pressures and motor currents are monitored and recorded by the system to ensure unit performance. Equal size side supply and return duct connections allow easy connection of ducts to match low crawl spaces without transition pieces. \u003c\/li\u003e\n\u003cli\u003eUtility connections made easy: Electric utility access is provided through the bottom or the side of the unit. Utility connections can be made quickly and with a minimum amount of field labor. A field-supplied electrical disconnect switch must be field installed. \u003c\/li\u003e\n\u003cli\u003eConvertible airflow design: The bottom duct openings are covered when they leave the factory, ready to be used for a side supply and side return application. If a bottom supply and bottom return application is required, remove the two panels from the bottom of the unit and place them in the side supply and side return duct openings. No panel cutting is required and no accessory panel is necessary. The convertible airflow design allows for maximum field flexibility and minimum inventory.\u003c\/li\u003e\r\nCondensate pan: A corrosion-resistant, long-lasting, watertight pan is positioned below the indoor coil to collect and drain all condensate, preventing build-up of stagnant condensate. The condensate pan conforms to ASHRAE 62-19 standards - Ventilation for Acceptable Indoor Air Quality. \n\u003cli\u003eCondensate drain: The 3\/4 in. NPT female connection is rigidly mounted to ensure correct fit and a leaktight seal. \u003c\/li\u003e\n\u003cli\u003eDurable finish: The cabinet is made of G90 galvanized steel with a powder paint coating for appearance and protection. The pre-treated galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. The powder paint finish ensures less fading when exposed to sunlight, and provides superior corrosion resistance. The powder paint finish is 1,000 h salt spray tested. \u003c\/li\u003e\n\u003cli\u003eFull perimeter base rails: The easily removable base rails provide a solid foundation for the entire unit and protect the unit during shipment. The rails provide forklift access from all sides, and rigging holes are also provided so an overhead crane can be used to place the units on a roof. On applications where the unit is placed on an equipment pad, the base keeps the unit off the equipment pad to deter corrosion. On applications where height is limited, the base rails can be removed by removing two screws in each corner. \u003c\/li\u003e\n\u003cli\u003eAttractive appearance: The single-piece top cover contains a top-discharge outdoor fan arrangement. The one-piece design adds greater water integrity. Rounded corners with water drip edges add to the attractive appearance. \u003c\/li\u003e\n\u003cli\u003eTop discharge: The top-discharge outdoor fan does not disrupt neighboring areas or dry out vegetation surrounding the unit. The warm air from the top-mounted fan is blown up and away from the structure and any landscaping. \u003c\/li\u003e\n\u003cli\u003eOutdoor coil grille: All models use a stamped slotted design that provides superior impact protection against small objects during transit and after installation. \u003c\/li\u003e\n\u003cli\u003eLow operating sound level: The upward airflow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates noise. The isolator mounted compressor and the louvered fins of the outdoor coils muffle the normal fan motor and compressor operating sound. The unique formed base pan also aids in sound attenuation with its structural design. \u003c\/li\u003e\n\u003cli\u003eFan system: All models operate over a wide range of design conditions with a standard ECM indoor blower motor. These units easily suit all types of applications and provide greater on-site flexibility to meet comfort requirements. The cooling and heating speeds are factory set at test design conditions but can be field adjusted. This allows for maximum comfort capabilities. \u003c\/li\u003e\n\u003cli\u003eLoss of charge switch: All models include a loss of charge switch to provide safe shutdown of the compressor. \u003c\/li\u003e\n\u003cli\u003eSimple control circuit: A printed circuit board contains a status and diagnostic indicator light. Units have a factory installed refrigerant detection system (RDS) and field thermostat wiring connects to the RDS screw terminals. Cooling controls use contactor and relays for simple application and troubleshooting. MATE-N- LOK plug connectors are used. The electrical control box is not located in the compressor compartment. The controls are mounted to allow removal of the separate access panel for troubleshooting and maintenance without affecting the normal system operating pressures. All wiring internal to the unit is color-coded and numbered. \u003c\/li\u003e\n\u003cli\u003eProtected compressor: The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high-pressure relief valve and a temperature sensor, which protects the compressor if unsuitable operating conditions occur. \u003c\/li\u003e\n\u003cli\u003eHigh-pressure switch: A high-pressure switch is standard in all units. When abnormal conditions are sensed through the high-pressure switch, the unit locks out, preventing any further operation until it is reset or the problem is corrected. \u003c\/li\u003e\n\u003cli\u003eExclusive coil design: The grooved copper tubes and enhanced aluminum fin construction of the outdoor coils improve heat transfer for maximum efficiency and durability. Indoor tube and fin coils have all aluminum construction for reliability and efficient heat transfer. \u003c\/li\u003e\n\u003cli\u003eLow maintenance: Long-life, permanently lubricated indoor blower motor bearings and outdoor fan motor bearings need no annual maintenance, adding greater reliability to the unit. The slide-out blower assembly and indoor coil assembly can be easily removed for cleaning. \u003c\/li\u003e\n\u003cli\u003eEasy service access: Individual access panels provide access to all major components, for example, the compressor, indoor coil, blower, controls, electric heat kit, and air filters, making servicing easy. Removing these panels allows easy removal of components such as the blower assembly for maintenance and troubleshooting. \u003c\/li\u003e\n\u003cli\u003eReplacement parts: The installer requires no special training to replace any of the components of these units. The number of new components has been reduced to minimize the inventory of unique parts. \u003c\/li\u003e\n\u003cli\u003eControls: Defrost curve options are preloaded into the demand defrost control board for optimized performance based on unit capabilities. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577587863617,"sku":"PH3E48N00S21","price":5019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-phe_1_aeded59b-5259-4b3f-88a2-83df9f28bfa9.png?v=1790725985"},{"product_id":"ph3e36n00s21-york-3-ton-13-4-seer2-r-454-lx-series-package-heat-pump","title":"York 3 Ton 13.4 SEER2 R-454 LX Series Package Heat Pump","description":"\u003cp\u003eThe York PH3E Packaged Heat Pumps are designed for outdoor installation. Only utility and duct connections are required at the point of installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Efficiency - All PHE4 heat pump models are rated at 14.0 SEER, 11.0 EER and 8.0 HSPF for cooling and heating operation.\u003c\/li\u003e\n\u003cli\u003eOperating efficiency: All PH3 heat pump models are rated at 13.4 SEER2 and 6.7 HSPF2 for cooling and heating operation. \u003c\/li\u003e\n\u003cli\u003eOn-site flexibility: All model sizes use a compact design cabinet in one of two footprints. This provides installer flexibility for placing the correct capacity unit on roof curbs, equipment pads, or concrete slabs with the smallest footprint after the internal load has been determined. Field-convertible duct connections from side shot to down shot allow the installer to have greater flexibility with less inventory. \u003c\/li\u003e\n\u003cli\u003eLower installation cost: Installation time and costs are reduced by easy power wiring and control wiring connections. The small base dimension means less space is required on the ground or roof. All units are completely wired, charged with R-454B, and tested before shipment. Test stations using a state-of-the-art computerized process system are used to ensure product quality. Refrigerant charge and component part numbers are verified using computer bar code scans during assembly. Vital run test statistics such as system pressures and motor currents are monitored and recorded by the system to ensure unit performance. Equal size side supply and return duct connections allow easy connection of ducts to match low crawl spaces without transition pieces. \u003c\/li\u003e\n\u003cli\u003eUtility connections made easy: Electric utility access is provided through the bottom or the side of the unit. Utility connections can be made quickly and with a minimum amount of field labor. A field-supplied electrical disconnect switch must be field installed. \u003c\/li\u003e\n\u003cli\u003eConvertible airflow design: The bottom duct openings are covered when they leave the factory, ready to be used for a side supply and side return application. If a bottom supply and bottom return application is required, remove the two panels from the bottom of the unit and place them in the side supply and side return duct openings. No panel cutting is required and no accessory panel is necessary. The convertible airflow design allows for maximum field flexibility and minimum inventory.\u003c\/li\u003e\r\nCondensate pan: A corrosion-resistant, long-lasting, watertight pan is positioned below the indoor coil to collect and drain all condensate, preventing build-up of stagnant condensate. The condensate pan conforms to ASHRAE 62-19 standards - Ventilation for Acceptable Indoor Air Quality. \n\u003cli\u003eCondensate drain: The 3\/4 in. NPT female connection is rigidly mounted to ensure correct fit and a leaktight seal. \u003c\/li\u003e\n\u003cli\u003eDurable finish: The cabinet is made of G90 galvanized steel with a powder paint coating for appearance and protection. The pre-treated galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. The powder paint finish ensures less fading when exposed to sunlight, and provides superior corrosion resistance. The powder paint finish is 1,000 h salt spray tested. \u003c\/li\u003e\n\u003cli\u003eFull perimeter base rails: The easily removable base rails provide a solid foundation for the entire unit and protect the unit during shipment. The rails provide forklift access from all sides, and rigging holes are also provided so an overhead crane can be used to place the units on a roof. On applications where the unit is placed on an equipment pad, the base keeps the unit off the equipment pad to deter corrosion. On applications where height is limited, the base rails can be removed by removing two screws in each corner. \u003c\/li\u003e\n\u003cli\u003eAttractive appearance: The single-piece top cover contains a top-discharge outdoor fan arrangement. The one-piece design adds greater water integrity. Rounded corners with water drip edges add to the attractive appearance. \u003c\/li\u003e\n\u003cli\u003eTop discharge: The top-discharge outdoor fan does not disrupt neighboring areas or dry out vegetation surrounding the unit. The warm air from the top-mounted fan is blown up and away from the structure and any landscaping. \u003c\/li\u003e\n\u003cli\u003eOutdoor coil grille: All models use a stamped slotted design that provides superior impact protection against small objects during transit and after installation. \u003c\/li\u003e\n\u003cli\u003eLow operating sound level: The upward airflow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates noise. The isolator mounted compressor and the louvered fins of the outdoor coils muffle the normal fan motor and compressor operating sound. The unique formed base pan also aids in sound attenuation with its structural design. \u003c\/li\u003e\n\u003cli\u003eFan system: All models operate over a wide range of design conditions with a standard ECM indoor blower motor. These units easily suit all types of applications and provide greater on-site flexibility to meet comfort requirements. The cooling and heating speeds are factory set at test design conditions but can be field adjusted. This allows for maximum comfort capabilities. \u003c\/li\u003e\n\u003cli\u003eLoss of charge switch: All models include a loss of charge switch to provide safe shutdown of the compressor. \u003c\/li\u003e\n\u003cli\u003eSimple control circuit: A printed circuit board contains a status and diagnostic indicator light. Units have a factory installed refrigerant detection system (RDS) and field thermostat wiring connects to the RDS screw terminals. Cooling controls use contactor and relays for simple application and troubleshooting. MATE-N- LOK plug connectors are used. The electrical control box is not located in the compressor compartment. The controls are mounted to allow removal of the separate access panel for troubleshooting and maintenance without affecting the normal system operating pressures. All wiring internal to the unit is color-coded and numbered. \u003c\/li\u003e\n\u003cli\u003eProtected compressor: The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high-pressure relief valve and a temperature sensor, which protects the compressor if unsuitable operating conditions occur. \u003c\/li\u003e\n\u003cli\u003eHigh-pressure switch: A high-pressure switch is standard in all units. When abnormal conditions are sensed through the high-pressure switch, the unit locks out, preventing any further operation until it is reset or the problem is corrected. \u003c\/li\u003e\n\u003cli\u003eExclusive coil design: The grooved copper tubes and enhanced aluminum fin construction of the outdoor coils improve heat transfer for maximum efficiency and durability. Indoor tube and fin coils have all aluminum construction for reliability and efficient heat transfer. \u003c\/li\u003e\n\u003cli\u003eLow maintenance: Long-life, permanently lubricated indoor blower motor bearings and outdoor fan motor bearings need no annual maintenance, adding greater reliability to the unit. The slide-out blower assembly and indoor coil assembly can be easily removed for cleaning. \u003c\/li\u003e\n\u003cli\u003eEasy service access: Individual access panels provide access to all major components, for example, the compressor, indoor coil, blower, controls, electric heat kit, and air filters, making servicing easy. Removing these panels allows easy removal of components such as the blower assembly for maintenance and troubleshooting. \u003c\/li\u003e\n\u003cli\u003eReplacement parts: The installer requires no special training to replace any of the components of these units. The number of new components has been reduced to minimize the inventory of unique parts. \u003c\/li\u003e\n\u003cli\u003eControls: Defrost curve options are preloaded into the demand defrost control board for optimized performance based on unit capabilities. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577587929153,"sku":"PH3E36N00S21","price":4410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-phe_1_ce899d51-5057-45c4-9d7e-d3e1f6ce30a4.png?v=1790725989"},{"product_id":"ph3e24n00s21-york-2-ton-13-4-seer2-r-454-lx-series-package-heat-pump","title":"York 2 Ton 13.4 SEER2 R-454 LX Series Package Heat Pump","description":"\u003cp\u003eThe York PH3E Packaged Heat Pumps are designed for outdoor installation. Only utility and duct connections are required at the point of installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Efficiency - All PHE4 heat pump models are rated at 14.0 SEER, 11.0 EER and 8.0 HSPF for cooling and heating operation.\u003c\/li\u003e\n\u003cli\u003eOperating efficiency: All PH3 heat pump models are rated at 13.4 SEER2 and 6.7 HSPF2 for cooling and heating operation. \u003c\/li\u003e\n\u003cli\u003eOn-site flexibility: All model sizes use a compact design cabinet in one of two footprints. This provides installer flexibility for placing the correct capacity unit on roof curbs, equipment pads, or concrete slabs with the smallest footprint after the internal load has been determined. Field-convertible duct connections from side shot to down shot allow the installer to have greater flexibility with less inventory. \u003c\/li\u003e\n\u003cli\u003eLower installation cost: Installation time and costs are reduced by easy power wiring and control wiring connections. The small base dimension means less space is required on the ground or roof. All units are completely wired, charged with R-454B, and tested before shipment. Test stations using a state-of-the-art computerized process system are used to ensure product quality. Refrigerant charge and component part numbers are verified using computer bar code scans during assembly. Vital run test statistics such as system pressures and motor currents are monitored and recorded by the system to ensure unit performance. Equal size side supply and return duct connections allow easy connection of ducts to match low crawl spaces without transition pieces. \u003c\/li\u003e\n\u003cli\u003eUtility connections made easy: Electric utility access is provided through the bottom or the side of the unit. Utility connections can be made quickly and with a minimum amount of field labor. A field-supplied electrical disconnect switch must be field installed. \u003c\/li\u003e\n\u003cli\u003eConvertible airflow design: The bottom duct openings are covered when they leave the factory, ready to be used for a side supply and side return application. If a bottom supply and bottom return application is required, remove the two panels from the bottom of the unit and place them in the side supply and side return duct openings. No panel cutting is required and no accessory panel is necessary. The convertible airflow design allows for maximum field flexibility and minimum inventory.\u003c\/li\u003e\r\nCondensate pan: A corrosion-resistant, long-lasting, watertight pan is positioned below the indoor coil to collect and drain all condensate, preventing build-up of stagnant condensate. The condensate pan conforms to ASHRAE 62-19 standards - Ventilation for Acceptable Indoor Air Quality. \n\u003cli\u003eCondensate drain: The 3\/4 in. NPT female connection is rigidly mounted to ensure correct fit and a leaktight seal. \u003c\/li\u003e\n\u003cli\u003eDurable finish: The cabinet is made of G90 galvanized steel with a powder paint coating for appearance and protection. The pre-treated galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. The powder paint finish ensures less fading when exposed to sunlight, and provides superior corrosion resistance. The powder paint finish is 1,000 h salt spray tested. \u003c\/li\u003e\n\u003cli\u003eFull perimeter base rails: The easily removable base rails provide a solid foundation for the entire unit and protect the unit during shipment. The rails provide forklift access from all sides, and rigging holes are also provided so an overhead crane can be used to place the units on a roof. On applications where the unit is placed on an equipment pad, the base keeps the unit off the equipment pad to deter corrosion. On applications where height is limited, the base rails can be removed by removing two screws in each corner. \u003c\/li\u003e\n\u003cli\u003eAttractive appearance: The single-piece top cover contains a top-discharge outdoor fan arrangement. The one-piece design adds greater water integrity. Rounded corners with water drip edges add to the attractive appearance. \u003c\/li\u003e\n\u003cli\u003eTop discharge: The top-discharge outdoor fan does not disrupt neighboring areas or dry out vegetation surrounding the unit. The warm air from the top-mounted fan is blown up and away from the structure and any landscaping. \u003c\/li\u003e\n\u003cli\u003eOutdoor coil grille: All models use a stamped slotted design that provides superior impact protection against small objects during transit and after installation. \u003c\/li\u003e\n\u003cli\u003eLow operating sound level: The upward airflow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates noise. The isolator mounted compressor and the louvered fins of the outdoor coils muffle the normal fan motor and compressor operating sound. The unique formed base pan also aids in sound attenuation with its structural design. \u003c\/li\u003e\n\u003cli\u003eFan system: All models operate over a wide range of design conditions with a standard ECM indoor blower motor. These units easily suit all types of applications and provide greater on-site flexibility to meet comfort requirements. The cooling and heating speeds are factory set at test design conditions but can be field adjusted. This allows for maximum comfort capabilities. \u003c\/li\u003e\n\u003cli\u003eLoss of charge switch: All models include a loss of charge switch to provide safe shutdown of the compressor. \u003c\/li\u003e\n\u003cli\u003eSimple control circuit: A printed circuit board contains a status and diagnostic indicator light. Units have a factory installed refrigerant detection system (RDS) and field thermostat wiring connects to the RDS screw terminals. Cooling controls use contactor and relays for simple application and troubleshooting. MATE-N- LOK plug connectors are used. The electrical control box is not located in the compressor compartment. The controls are mounted to allow removal of the separate access panel for troubleshooting and maintenance without affecting the normal system operating pressures. All wiring internal to the unit is color-coded and numbered. \u003c\/li\u003e\n\u003cli\u003eProtected compressor: The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high-pressure relief valve and a temperature sensor, which protects the compressor if unsuitable operating conditions occur. \u003c\/li\u003e\n\u003cli\u003eHigh-pressure switch: A high-pressure switch is standard in all units. When abnormal conditions are sensed through the high-pressure switch, the unit locks out, preventing any further operation until it is reset or the problem is corrected. \u003c\/li\u003e\n\u003cli\u003eExclusive coil design: The grooved copper tubes and enhanced aluminum fin construction of the outdoor coils improve heat transfer for maximum efficiency and durability. Indoor tube and fin coils have all aluminum construction for reliability and efficient heat transfer. \u003c\/li\u003e\n\u003cli\u003eLow maintenance: Long-life, permanently lubricated indoor blower motor bearings and outdoor fan motor bearings need no annual maintenance, adding greater reliability to the unit. The slide-out blower assembly and indoor coil assembly can be easily removed for cleaning. \u003c\/li\u003e\n\u003cli\u003eEasy service access: Individual access panels provide access to all major components, for example, the compressor, indoor coil, blower, controls, electric heat kit, and air filters, making servicing easy. Removing these panels allows easy removal of components such as the blower assembly for maintenance and troubleshooting. \u003c\/li\u003e\n\u003cli\u003eReplacement parts: The installer requires no special training to replace any of the components of these units. The number of new components has been reduced to minimize the inventory of unique parts. \u003c\/li\u003e\n\u003cli\u003eControls: Defrost curve options are preloaded into the demand defrost control board for optimized performance based on unit capabilities. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588092993,"sku":"PH3E24N00S21","price":4095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-phe_1.png?v=1790725995"},{"product_id":"yh660e2s11-jhe60d5ch2ss1-york-5-ton-16-seer2-r-454b-heat-pump-system-bundle","title":"York 5 Ton 16 SEER2 R-454B High-Efficiency Heat Pump System Bundle *SPECIAL OFFER*","description":"\u003cp\u003eThe \u003cstrong\u003eYork YH6 + JHE\u003c\/strong\u003e is a factory-matched R-454B High-Efficiency Heat Pump System; assembled as a complete, ready-to-install York Premium Bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eWhat's Included in This Bundle\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRespicare Whole Home Air Purifier\u003c\/strong\u003e — whole-house indoor air quality and purification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3M Foil Tape\u003c\/strong\u003e — professional-grade sealing for ductwork and connections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRectorseal Surge Protector \/ Voltage Monitoring Disconnect\u003c\/strong\u003e — protects the system from power surges and voltage irregularities\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHoneywell S1000 Thermostat\u003c\/strong\u003e — precise, easy-to-use temperature control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSS1 Float Switch\u003c\/strong\u003e — condensate overflow protection to help prevent water damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e½\" x 6' Electrical Whip\u003c\/strong\u003e — pre-assembled electrical connection whip for a faster hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e The York YH6 Heat Pump Condenser\u003c\/strong\u003e delivers high-efficiency, year-round heating and cooling performance engineered for modern residential and light commercial HVAC applications. Featuring an advanced two-stage scroll compressor and a durable coil design, this split-system outdoor unit provides precise temperature control, enhanced indoor humidity management, and maximum seasonal efficiency rated up to 16 SEER2 and 8.0+ HSPF2. Built with low-GWP R-454B refrigerant and a heavy-gauge, salt-spray-rated steel cabinet, the YH6 Heat Pump Condenser offers an eco-friendly, long-lasting solution for total home or business climate control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eKey Features \u0026amp; Benefits\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Energy Savings:\u003c\/strong\u003e Reaches up to 16 SEER2 and 8.0+ HSPF2 ratings, meeting CEE Tier 1 requirements for lower utility bills and potential tax credit eligibility.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTwo-Stage Scroll Compressor:\u003c\/strong\u003e Operates at two capacities to deliver consistent temperature control, superior dehumidification, and quieter performance compared to single-stage units.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEco-Friendly Low-GWP Refrigerant:\u003c\/strong\u003e Uses next-generation R-454B refrigerant to ensure low Global Warming Potential and full compliance with modern environmental standards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Cabinet Protection:\u003c\/strong\u003e Features a heavy-gauge galvanized steel cabinet finished with a corrosion-resistant, powder-coat paint and protective coil guards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile System Matching:\u003c\/strong\u003e Fully compatible with matching air handlers or gas furnaces to create high-performance heat pump systems or dual-fuel hybrid systems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuiet \u0026amp; Service-Friendly Design:\u003c\/strong\u003e Engineered with swept-wing fan blades for low outdoor noise levels, alongside corner service panels for fast installation and maintenance access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eSmooth sides and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588191297,"sku":"YH660E2S11 - JHE60D5CH2SS1","price":6347.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york_premium_bundle_1000_e5f1db80-dfd5-491a-af56-9063f4dd9f25.jpg?v=1790725998"},{"product_id":"hh860e2s11-jhc60c5ch2ss1-york-5-ton-19-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler-21-wide","title":"York 5 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588256833,"sku":"HH860E2S11 - JHC60C5CH2SS1","price":6335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-4-5-ton_737484da-8326-4bc1-b5d5-96353890c237.jpg?v=1790726000"},{"product_id":"hh860e2s11-jhc48d5cg2ss1-york-4-ton-18-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler-24-5-wide","title":"York 4 Ton 18 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler) 24.5\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588289601,"sku":"HH860E2S11 - JHC48D5CG2SS1","price":6270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-4-5-ton_f904365d-66be-4a6a-8a51-2eaaa84ea601.jpg?v=1790726001"},{"product_id":"hh860e2s11-jhc48c5cg2ss1-york-4-ton-19-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler-21-wide","title":"York 4 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588322369,"sku":"HH860E2S11 - JHC48C5CG2SS1","price":6265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-4-5-ton_2dab1472-5e1c-4fed-9389-93190aec82af.jpg?v=1790726002"},{"product_id":"yh460e2s11-jhc60d5ch2ss1-york-5-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-24-5-wide","title":"York 5 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (24.5\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588355137,"sku":"YH460E2S11 - JHC60D5CJ2SS1","price":6130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_18_3d5a0334-1bda-4e45-bdc1-6bdc7bf3e5ce.jpg?v=1790726004"},{"product_id":"yh460e2s11-jhc60c5ch2ss1-york-5-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 5 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588387905,"sku":"YH460E2S11 - JHC60C5CH2SS1","price":6121.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_18_993d7d7e-c333-4a05-9a9b-f75c6c1bc531.jpg?v=1790726006"},{"product_id":"hh860e2s11-jhe60c5ch2ss1-york-5-ton-19-seer2-variable-speed-heat-pump-system-ecm-air-handler-21-wide","title":"York 5 Ton 19 SEER2 Variable Speed Heat Pump System (ECM Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588453441,"sku":"HH860E2S11 - JHE60C5CH2SS1","price":5961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-4-5-ton_97782844-f25b-49e4-904e-69b383efc6b1.jpg?v=1790726011"},{"product_id":"hh860e2s11-jhe48c5cg2ss1-york-4-ton-19-seer2-variable-speed-heat-pump-system-ecm-air-handler-21-wide","title":"York 4 Ton 19 SEER2 Variable Speed Heat Pump System (ECM Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588486209,"sku":"HH860E2S11 - JHE48C5CG2SS1","price":5891.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-4-5-ton.jpg?v=1790726013"},{"product_id":"yh448e2s11-jhc48d5cg2ss1-york-4-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-24-5-wide","title":"York 4 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (24.5\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588518977,"sku":"YH448E2S11 - JHC48D5CG2SS1","price":5871.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_17_46cfb655-3eed-4181-88bd-59296b3c40c4.jpg?v=1790726014"},{"product_id":"yh448e2s11-jhc48c5cg2ss1-york-4-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 4 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588551745,"sku":"YH448E2S11 - JHC48C5CG2SS1","price":5866.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_17_b90850fd-8df0-4d67-a7b7-297479029b8f.jpg?v=1790726016"},{"product_id":"yh648e2s11-jhe60d5ch2ss1-york-4-ton-16-seer2-r-454b-heat-pump-system-bundle","title":"York 4 Ton 16 SEER2 R-454B High-Efficiency Heat Pump System Bundle *SPECIAL OFFER*","description":"\u003cp\u003eThe \u003cstrong\u003eYork YH6 + JHE\u003c\/strong\u003e is a factory-matched R-454B High-Efficiency Heat Pump System; assembled as a complete, ready-to-install York Premium Bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eWhat's Included in This Bundle\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRespicare Whole Home Air Purifier\u003c\/strong\u003e — whole-house indoor air quality and purification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3M Foil Tape\u003c\/strong\u003e — professional-grade sealing for ductwork and connections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRectorseal Surge Protector \/ Voltage Monitoring Disconnect\u003c\/strong\u003e — protects the system from power surges and voltage irregularities\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHoneywell S1000 Thermostat\u003c\/strong\u003e — precise, easy-to-use temperature control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSS1 Float Switch\u003c\/strong\u003e — condensate overflow protection to help prevent water damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e½\" x 6' Electrical Whip\u003c\/strong\u003e — pre-assembled electrical connection whip for a faster hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e The York YH6 Heat Pump Condenser\u003c\/strong\u003e delivers high-efficiency, year-round heating and cooling performance engineered for modern residential and light commercial HVAC applications. Featuring an advanced two-stage scroll compressor and a durable coil design, this split-system outdoor unit provides precise temperature control, enhanced indoor humidity management, and maximum seasonal efficiency rated up to 16 SEER2 and 8.0+ HSPF2. Built with low-GWP R-454B refrigerant and a heavy-gauge, salt-spray-rated steel cabinet, the YH6 Heat Pump Condenser offers an eco-friendly, long-lasting solution for total home or business climate control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eKey Features \u0026amp; Benefits\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Energy Savings:\u003c\/strong\u003e Reaches up to 16 SEER2 and 8.0+ HSPF2 ratings, meeting CEE Tier 1 requirements for lower utility bills and potential tax credit eligibility.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTwo-Stage Scroll Compressor:\u003c\/strong\u003e Operates at two capacities to deliver consistent temperature control, superior dehumidification, and quieter performance compared to single-stage units.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEco-Friendly Low-GWP Refrigerant:\u003c\/strong\u003e Uses next-generation R-454B refrigerant to ensure low Global Warming Potential and full compliance with modern environmental standards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Cabinet Protection:\u003c\/strong\u003e Features a heavy-gauge galvanized steel cabinet finished with a corrosion-resistant, powder-coat paint and protective coil guards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile System Matching:\u003c\/strong\u003e Fully compatible with matching air handlers or gas furnaces to create high-performance heat pump systems or dual-fuel hybrid systems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuiet \u0026amp; Service-Friendly Design:\u003c\/strong\u003e Engineered with swept-wing fan blades for low outdoor noise levels, alongside corner service panels for fast installation and maintenance access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eSmooth sides and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588584513,"sku":"YH648E2S11 - JHE60D5CH2SS1","price":5820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york_premium_bundle_1000_89131373-fe5e-4e8f-be43-7ec4da0d00bb.jpg?v=1790726017"},{"product_id":"yh460e2s11-jhe60d5ch2ss1-york-5-ton-14-3-seer2-r-454b-heat-pump-system-24-5-wide","title":"York 5 Ton 14.3 SEER2 R-454B Heat Pump System (24.5\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588617281,"sku":"YH460E2S11 - JHE60D5CH2SS1","price":5806.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_18_6e2be9ad-0f9e-495e-936b-5142b2e825d1.jpg?v=1790726019"},{"product_id":"yh460e2s11-jhe60c5ch2ss1-york-5-ton-14-3-seer2-r-454b-heat-pump-system-21-wide","title":"York 5 Ton 14.3 SEER2 R-454B Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588715585,"sku":"YH460E2S11 - JHE60C5CH2SS1","price":5746.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_18.jpg?v=1790726023"},{"product_id":"yh448e2s11-jhe48c5cg2ss1-york-4-ton-14-3-seer2-r-454b-heat-pump-system-21-wide","title":"York 4 Ton 14.3 SEER2 R-454B Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588748353,"sku":"YH448E2S11 - JHE48C5CG2SS1","price":5702.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_17.jpg?v=1790726024"},{"product_id":"hh836e2s11-jhc36c5cd2ss1-york-3-ton-19-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler-21-wide","title":"York 3 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588813889,"sku":"HH836E2S11 - JHC36C5AD2SS1","price":5626.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton_1_cdfd853e-962d-47e9-ab5a-65b66b93a7a3.jpg?v=1790726025"},{"product_id":"hh836e2s11-jhc36b5cd2ss1-york-3-ton-19-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler-17-5-wide","title":"York 3 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler) 17.5\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588846657,"sku":"HH836E2S11 - JHC36B5AD2SS1","price":5597.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton_1_81161074-b0af-4c34-8064-5109a61f3bcb.jpg?v=1790726027"},{"product_id":"yh560e2s11-jhc60d5ch2ss1-york-5-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system-24-5-wide","title":"York 5 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System (24.5\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588912193,"sku":"YH560E2S11 - JHC60D5CJ2SS1","price":5407.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_22_9833bf76-d7a8-40d3-914c-34f5848f90d2.jpg?v=1790726030"},{"product_id":"yh560e2s11-jhc60c5ch2ss1-york-5-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 5 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577588944961,"sku":"YH560E2S11 - JHC60C5CH2SS1","price":5397.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_22_3f3e862e-f960-43b9-8534-61de09f067d5.jpg?v=1790726032"},{"product_id":"hh836e2s11-jhe36c5cd2ss1-york-3-ton-19-seer2-r-454b-variable-speed-heat-pump-system-ecm-air-handler-21-wide","title":"York 3 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (ECM Air Handler) 21\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589108801,"sku":"HH836E2S11 - JHE36C5AD2SS1","price":5258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton_1_8245a588-6ca4-49e6-ab74-9b23b76abe17.jpg?v=1790726037"},{"product_id":"hh836e2s11-jhe36b5cd2ss1-york-3-ton-19-seer2-r-454b-variable-speed-heat-pump-system-ecm-air-handler-17-5-wide","title":"York 3 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (ECM Air Handler) 17.5\" Wide","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589141569,"sku":"HH836E2S11 - JHE36B5CD2SS1","price":5227.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton_1.jpg?v=1790726039"},{"product_id":"yh436e2s11-jhc36c5cd2ss1-york-3-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 3 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589174337,"sku":"YH436E2S11 - JHC36C5AD2SS1","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_16_bb25781e-1838-41e2-9f9d-b79d571a8312.jpg?v=1790726040"},{"product_id":"yh436e2s11-jhc36b5cd2ss1-york-3-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system-17-5-wide","title":"York 3 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System (17.5\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589207105,"sku":"YH436E2S11 - JHC36B5AD2SS1","price":5173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_16_938f86ad-2363-4f85-a8e4-206569a7ea94.jpg?v=1790726042"},{"product_id":"yh636e2s11-jhe36c5cd2ss1-york-3-ton-16-seer2-r-454b-heat-pump-system-bundle","title":"York 3 Ton 16 SEER2 R-454B High-Efficiency Heat Pump System Bundle *SPECIAL OFFER*","description":"\u003cp\u003eThe \u003cstrong\u003eYork YH6 + JHE\u003c\/strong\u003e is a factory-matched R-454B High-Efficiency Heat Pump System; assembled as a complete, ready-to-install York Premium Bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eWhat's Included in This Bundle\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRespicare Whole Home Air Purifier\u003c\/strong\u003e — whole-house indoor air quality and purification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3M Foil Tape\u003c\/strong\u003e — professional-grade sealing for ductwork and connections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRectorseal Surge Protector \/ Voltage Monitoring Disconnect\u003c\/strong\u003e — protects the system from power surges and voltage irregularities\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHoneywell S1000 Thermostat\u003c\/strong\u003e — precise, easy-to-use temperature control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSS1 Float Switch\u003c\/strong\u003e — condensate overflow protection to help prevent water damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e½\" x 6' Electrical Whip\u003c\/strong\u003e — pre-assembled electrical connection whip for a faster hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e The York YH6 Heat Pump Condenser\u003c\/strong\u003e delivers high-efficiency, year-round heating and cooling performance engineered for modern residential and light commercial HVAC applications. Featuring an advanced two-stage scroll compressor and a durable coil design, this split-system outdoor unit provides precise temperature control, enhanced indoor humidity management, and maximum seasonal efficiency rated up to 16 SEER2 and 8.0+ HSPF2. Built with low-GWP R-454B refrigerant and a heavy-gauge, salt-spray-rated steel cabinet, the YH6 Heat Pump Condenser offers an eco-friendly, long-lasting solution for total home or business climate control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eKey Features \u0026amp; Benefits\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Energy Savings:\u003c\/strong\u003e Reaches up to 16 SEER2 and 8.0+ HSPF2 ratings, meeting CEE Tier 1 requirements for lower utility bills and potential tax credit eligibility.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTwo-Stage Scroll Compressor:\u003c\/strong\u003e Operates at two capacities to deliver consistent temperature control, superior dehumidification, and quieter performance compared to single-stage units.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEco-Friendly Low-GWP Refrigerant:\u003c\/strong\u003e Uses next-generation R-454B refrigerant to ensure low Global Warming Potential and full compliance with modern environmental standards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Cabinet Protection:\u003c\/strong\u003e Features a heavy-gauge galvanized steel cabinet finished with a corrosion-resistant, powder-coat paint and protective coil guards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile System Matching:\u003c\/strong\u003e Fully compatible with matching air handlers or gas furnaces to create high-performance heat pump systems or dual-fuel hybrid systems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuiet \u0026amp; Service-Friendly Design:\u003c\/strong\u003e Engineered with swept-wing fan blades for low outdoor noise levels, alongside corner service panels for fast installation and maintenance access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eSmooth sides and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589239873,"sku":"YH636E2S11 - JHE36C5CD2SS1","price":5095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york_premium_bundle_1000_5f17645a-8a14-4d23-b1fc-ac83e1418f64.jpg?v=1790726043"},{"product_id":"yh560e2s11-jhe60d5ch2ss1-york-5-ton-15-2-seer2-r-454b-heat-pump-system","title":"York 5 Ton 15.2 SEER2 R-454B Heat Pump System","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589272641,"sku":"YH560E2S11 - JHE60D5CH2SS1","price":5084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_22.jpg?v=1790726045"},{"product_id":"yh548e2s11-jhc48d5cg2ss1-york-4-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system-24-5-wide","title":"York 4 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System (24.5\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589534785,"sku":"YH548E2S11 - JHC48D5CG2SS1","price":4998.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_21_c69b6759-e43b-43ea-a633-990e8a1623fd.jpg?v=1790726051"},{"product_id":"yh548e2s11-jhc48c5cg2ss1-york-4-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 4 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589600321,"sku":"YH548E2S11 - JHC48C5CG2SS1","price":4993.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_21_7e840482-2d4e-4cea-9c24-aa5ba89a4a41.jpg?v=1790726052"},{"product_id":"hh824e2s11-jhc24b5ac2ss1-york-2-ton-19-seer2-r-454b-variable-speed-heat-pump-system-variable-speed-air-handler","title":"York 2 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (Variable Speed Air Handler)","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589665857,"sku":"HH824E2S11 - JHC24B5AC2SS1","price":4948.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton_02ea46b3-2940-41d8-b5e5-fae904b23a04.jpg?v=1790726055"},{"product_id":"yh436e2s11-jhe36c5cd2ss1-york-3-ton-14-3-seer2-r-454b-heat-pump-system-21-wide","title":"York 3 Ton 14.3 SEER2 R-454B Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589731393,"sku":"YH436E2S11 - JHE36C5AD2SS1","price":4834.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_16_1e26093e-8384-4185-88d0-3490de25f877.jpg?v=1790726057"},{"product_id":"yh436e2s11-jhe36b5cd2ss1-york-3-ton-14-3-seer2-r-454b-heat-pump-system-17-5-wide","title":"York 3 Ton 14.3 SEER2 R-454B Heat Pump System (17.5\" Wide)","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577589862465,"sku":"YH436E2S11 - JHE36B5CD2SS1","price":4804.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_16.jpg?v=1790726061"},{"product_id":"yh548e2s11-jhe48c5cg2ss1-york-4-ton-15-2-seer2-r-454b-heat-pump-system-21-wide","title":"York 4 Ton 15.2 SEER2 R-454B Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577590124609,"sku":"YH548E2S11 - JHE48C5CG2SS1","price":4619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_21.jpg?v=1790726069"},{"product_id":"yh536e2s11-jhc36c5cd2ss1-york-3-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system-21-wide","title":"York 3 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577590190145,"sku":"YH536E2S11 - JHC36C5AD2SS1","price":4580.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_20_8c7036bd-08b0-4717-96a9-401fd72e9388.jpg?v=1790726071"},{"product_id":"hh824e2s11-jhe24b5ac2ss1-york-2-ton-19-seer2-r-454b-variable-speed-heat-pump-system-ecm-air-handler","title":"York 2 Ton 19 SEER2 R-454B Variable Speed Heat Pump System (ECM Air Handler)","description":"\u003cp\u003eThe York HH8 horizontal discharge variable speed heat pumps are the outdoor section of a high-efficiency heating and cooling system. The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Match each HH8 unit with one ducted indoor unit. This unit is not designed for application in a ductless configuration. Sweat connect units are factory charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 DC inverter driven technology: With 360 DC inverter driven technology, compressor rotation direction and speed is controlled, optimizing energy usage and compressor stability through the range of operating conditions. This guarantees optimal space temperature control while providing quiet operation. \u003c\/li\u003e\n\u003cli\u003ePressure sensor: This unit contains pressure sensing technology, which detects low pressure in cooling mode and high pressure in heating mode to protect the system from damage. Intelligent control can also be achieved by calculating the indoor coil temperature from system suction pressure. \u003c\/li\u003e\n\u003cli\u003eSmaller outdoor form factor for installation flexibility: This side-discharge outdoor unit saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard, or roof installation. \u003c\/li\u003e\n\u003cli\u003eStable temperature control means optimal comfort: The DC inverter is able to provide full capacity at startup to cool or warm quickly and adjusts speed to prevent temperature fluctuation and energy loss. \u003c\/li\u003e\n\u003cli\u003eAgency listed: Safety certified by UL 60335-2-40:2022 Ed.4 and CSA C22.2#60335-2-40:2022 Ed.4. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577590878273,"sku":"HH824E2S11 - JHE24B5AC2SS1","price":4545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-hh8-split-electric-2-3-ton.jpg?v=1790726074"},{"product_id":"yh424e2s11-jhc24b5ac2ss1-york-2-ton-14-3-seer2-r-454b-variable-speed-heat-pump-system","title":"York 2 Ton 14.3 SEER2 R-454B Variable Speed Heat Pump System","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577591468097,"sku":"YH424E2S11 - JHC24B5AC2SS1","price":4545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_15_21e02f0d-192e-4deb-adf3-fadd92948b9f.jpg?v=1790726075"},{"product_id":"yh624e2s11-jhe24b5ac2ss1-york-2-ton-16-seer2-r-454b-heat-pump-system-bundle","title":"York 2 Ton 16 SEER2 R-454B High-Efficiency Heat Pump System Bundle *SPECIAL OFFER*","description":"\u003cp\u003eThe \u003cstrong\u003eYork YH6 + JHE\u003c\/strong\u003e is a factory-matched R-454B High-Efficiency Heat Pump System; assembled as a complete, ready-to-install York Premium Bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eWhat's Included in This Bundle\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRespicare Whole Home Air Purifier\u003c\/strong\u003e — whole-house indoor air quality and purification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3M Foil Tape\u003c\/strong\u003e — professional-grade sealing for ductwork and connections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRectorseal Surge Protector \/ Voltage Monitoring Disconnect\u003c\/strong\u003e — protects the system from power surges and voltage irregularities\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHoneywell S1000 Thermostat\u003c\/strong\u003e — precise, easy-to-use temperature control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSS1 Float Switch\u003c\/strong\u003e — condensate overflow protection to help prevent water damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e½\" x 6' Electrical Whip\u003c\/strong\u003e — pre-assembled electrical connection whip for a faster hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e The York YH6 Heat Pump Condenser\u003c\/strong\u003e delivers high-efficiency, year-round heating and cooling performance engineered for modern residential and light commercial HVAC applications. Featuring an advanced two-stage scroll compressor and a durable coil design, this split-system outdoor unit provides precise temperature control, enhanced indoor humidity management, and maximum seasonal efficiency rated up to 16 SEER2 and 8.0+ HSPF2. Built with low-GWP R-454B refrigerant and a heavy-gauge, salt-spray-rated steel cabinet, the YH6 Heat Pump Condenser offers an eco-friendly, long-lasting solution for total home or business climate control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eKey Features \u0026amp; Benefits\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Energy Savings:\u003c\/strong\u003e Reaches up to 16 SEER2 and 8.0+ HSPF2 ratings, meeting CEE Tier 1 requirements for lower utility bills and potential tax credit eligibility.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTwo-Stage Scroll Compressor:\u003c\/strong\u003e Operates at two capacities to deliver consistent temperature control, superior dehumidification, and quieter performance compared to single-stage units.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEco-Friendly Low-GWP Refrigerant:\u003c\/strong\u003e Uses next-generation R-454B refrigerant to ensure low Global Warming Potential and full compliance with modern environmental standards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Cabinet Protection:\u003c\/strong\u003e Features a heavy-gauge galvanized steel cabinet finished with a corrosion-resistant, powder-coat paint and protective coil guards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile System Matching:\u003c\/strong\u003e Fully compatible with matching air handlers or gas furnaces to create high-performance heat pump systems or dual-fuel hybrid systems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuiet \u0026amp; Service-Friendly Design:\u003c\/strong\u003e Engineered with swept-wing fan blades for low outdoor noise levels, alongside corner service panels for fast installation and maintenance access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eSmooth sides and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577591894081,"sku":"YH624E2S11 - JHE24B5AC2SS1","price":4540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york_premium_bundle_1000_56d233ec-a685-453c-8136-e70aa0697bf3.jpg?v=1790726078"},{"product_id":"yh524e2s11-jhc24b5ac2ss1-york-2-ton-15-2-seer2-r-454b-variable-speed-heat-pump-system","title":"York 2 Ton 15.2 SEER2 R-454B Variable Speed Heat Pump System","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHC Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxAlloyTM coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability\u003c\/li\u003e\n\u003cli\u003eNext generation even-flow distributor: Designed for balanced refrigerant flow and even coil circuit performance\u003c\/li\u003e\n\u003cli\u003eNext generation high-efficiency blower: Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor\u003c\/li\u003e\n\u003cli\u003eVariable speed operation Provides flexibility in application as well as upgraded system efficiency\u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eModular blower control board: The control board can be controlled with a standard (conventional) thermostat or with a HX communicating control. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eThermostat drain pan: Positive slope for drainage to reduce cause for potential mold or contaminant\u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577594024001,"sku":"YH524E2S11 - JHC24B5AC2SS1","price":4295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_19_7be6e645-e923-47ee-951a-9a1cccf48216.jpg?v=1790726086"},{"product_id":"yh536e2s11-jhe36c5cd2ss1-york-3-ton-15-2-seer2-r-454b-heat-pump-system-21-wide","title":"York 3 Ton 15.2 SEER2 R-454B Heat Pump System (21\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577595629633,"sku":"YH536E2S11 - JHE36C5AD2SS1","price":4210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_20_633ef468-1130-44b8-8bd2-04552d586909.jpg?v=1790726090"},{"product_id":"yh536e2s11-jhe36b5cd2ss1-york-3-ton-15-2-seer2-r-454b-heat-pump-system-17-5-wide","title":"York 3 Ton 15.2 SEER2 R-454B Heat Pump System (17.5\" Wide)","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577595990081,"sku":"YH536E2S11 - JHE36B5CD2SS1","price":4181.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_20.jpg?v=1790726092"},{"product_id":"yh424e2s11-jhe24b5ac2ss1-york-2-ton-14-3-seer2-r-454b-heat-pump-system","title":"York 2 Ton 14.3 SEER2 R-454B Heat Pump System","description":"\u003cp\u003eThe York YH4 Heat Pump is part of our successful 14.3 SEER2 Regional Minimum Efficiency product line available in the United States. These outdoor units are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577596416065,"sku":"YH424E2S11 - JHE24B5AC2SS1","price":4141.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_15.jpg?v=1790726094"},{"product_id":"yh524e2s11-jhe24b5ac2ss1-york-2-ton-15-2-seer2-r-454b-heat-pump-system","title":"York 2 Ton 15.2 SEER2 R-454B Heat Pump System","description":"\u003cp\u003eThe York YH5 Heat Pump is part of our successful split system heat pump lineup. These outdoor units are optimized for 15.2 SEER2\/7.8 HSPF2 Minimum Efficiency in all US Regions, and are specifically designed to be matched with our residential indoor coils, furnaces, and air handlers to provide a complete system solution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The filter-drier is shipped loose for installation in the field. The unit is factory-charged for 15 ft refrigeration piping. The small base dimension and reduced unit clearances make for easier retrofits. \u003c\/li\u003e\n\u003cli\u003eAccessible information - QR code on unit provides quick access to technical documents and warranty information. \u003c\/li\u003e\n\u003cli\u003eDurable finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Modern Mist colored powdercoat paint further protects external panels. \u003c\/li\u003e\n\u003cli\u003eQuality coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. \u003c\/li\u003e\n\u003cli\u003eRugged coil protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. \u003c\/li\u003e\n\u003cli\u003eProtected compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eReliable operation - Ball bearing fan motors provide superior performance in extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly - CFC-free R-454B refrigerant delivers environmentally friendly performance with zero ozone depletion. \u003c\/li\u003e\n\u003cli\u003eTop discharge - Warm air is blown up, away from the structure and any landscaping, allowing compact location on multi-unit applications. \u003c\/li\u003e\n\u003cli\u003eLow operating sound levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 77 dBA or lower. Compatible accessories for further sound reduction are also available. \u003c\/li\u003e\n\u003cli\u003eBetter service access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. \u003c\/li\u003e\n\u003cli\u003eAgency listed - Safety certified by CSA to UL 60335-2-40\/CSA C22.2. Performance certified to ANSI\/AHRI Standard 210\/240 in accordance with the Unitary Small Equipment certification program. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe York JHE Air Handler provides the flexibility for installation in upflow, downflow, horizontal right, or horizontal left applications. These units may be located in a closet, utility room, attic, crawl space, or basement. These versatile models may be used for cooling or heat pump operation with or without electric heat. Top or side power and control wiring, color-coded leads for control wiring, and electric heaters all combine to make the installation easy and minimize installation cost. Electric heat kits are available as field-installed accessories.  An R-454B refrigerant detection system (RDS) is factory installed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cb\u003e\u003cspan style=\"font-size: medium;\"\u003eStandard Features:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor. \u003c\/li\u003e\n\u003cli\u003eTwo-stage operation Provides flexibility in application with single and two-stage outdoor equipment. \u003c\/li\u003e\n\u003cli\u003eNext generation insulation and gasket design Reduces thermal transmission paths and reduces sweating. \u003c\/li\u003e\n\u003cli\u003eNine speed standard ECM blower motor Provides increased system compatibility. \u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and service\u003c\/li\u003e\n\u003cli\u003eA casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. \u003c\/li\u003e\n\u003cli\u003eCabinet air leakage: Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193. \u003c\/li\u003e\n\u003cli\u003eLong lasting quality: Structural components made of post powder painted steel or galvanized steel to prevent corrosion. \u003c\/li\u003e\n\u003cli\u003eA2L refrigerant ready: An R-454B refrigerant detection system (RDS) is factory installed. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577597726785,"sku":"YH524E2S11 - JHE24B5AC2SS1","price":3891.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/york-split-electric_19_f62a3c3a-9414-4476-ac05-f2bd76f9bc9e.jpg?v=1790726103"},{"product_id":"tph4060e100a-tuttokool-5-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 5 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577607917633,"sku":"TPH4060E100A","price":3750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit_471e8103-f70d-4973-902c-6caac85fac07.jpg?v=1790726175"},{"product_id":"tph4042e100a-tuttokool-3-5-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 3.5 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577607950401,"sku":"TPH4042E100A","price":3375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit_724a5024-a808-4cd8-b4cb-f01519359c4d.jpg?v=1790726176"},{"product_id":"tph4024e100a-tuttokool-2-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 2 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577607983169,"sku":"TPH4024E100A","price":2825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit_a4ee9acb-9a2b-475e-8f40-1daacdec993b.jpg?v=1790726177"},{"product_id":"tph4030e100a-tuttokool-2-5-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 2.5 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577608015937,"sku":"TPH4030E100A","price":2975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit.jpg?v=1790726178"},{"product_id":"tph4036e100a-tuttokool-3-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 3 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577608048705,"sku":"TPH4036E100A","price":3150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit_ebbf98f2-ae7c-478b-b86d-0670b626c2a6.jpg?v=1790726179"},{"product_id":"tph4048e100a-tuttokool-4-ton-13-4-seer2-r-454b-horizontal-package-heat-pump","title":"TuttoKool 4 Ton 13.4 SEER2 R-454B Horizontal Package Heat Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe TuttoKool TPH4 Packaged Heat Pump\u003c\/span\u003e\u003c\/strong\u003e consolidate your heating and cooling equipment within a single durable steel cabinet. Our models are compatible with a wide variety of homes, including flexible configurations for an air conditioner, heat pump, air handler, or furnaces.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eStandard Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR-4554B Refrigerant\u003c\/li\u003e\n\u003cli\u003e2-5 ton capacities available\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 13.4 SEER2 ratings\u003c\/li\u003e\n\u003cli\u003eArchitectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray\u003c\/li\u003e\n\u003cli\u003eQuiet horizontal discharge\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency compressors operate smoothly, quietly, consistently\u003c\/li\u003e\n\u003cli\u003eAuxiliary electric heaters available as a field installed option: 5kW,8kW,10kW,15kW,20kW (available heater sizes vary depending on model tonnage)\u003c\/li\u003e\n\u003cli\u003eSuitable for Manufactured\/Mobile Home Use\u003c\/li\u003e\n\u003cli\u003eScroll compressor standard on 3.5 - 5 Ton models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eWarranty Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Years: Standard Warranty\u003c\/li\u003e\n\u003cli\u003e10 Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577608081473,"sku":"TPH4048E100A","price":3495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/TK_Package_Unit_6170cbfe-c009-40d2-a172-c95903e488b0.jpg?v=1790726181"},{"product_id":"thp5060a1000a-t4ah4e60c000a-jayhtr1a10bkraa-tuttokool-5-ton-14-3-seer2-r-454b-heat-pump-system-w10kw-heat","title":"TuttoKool 5 Ton 14.3 SEER2 R-454B Heat Pump System w\/10Kw Heat","description":"\u003cp\u003eThe TuttoKool Heat Pump Condenser offers you high quality product at an affordable price, breaking the traditional view that a Heat Pump  has to be expensive.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEco-friendly R454B refrigerant with low GWP value. \u003c\/li\u003e\n\u003cli\u003eEnergy-efficient compressor. \u003c\/li\u003e\n\u003cli\u003eEquipped with thermal overload protection. \u003c\/li\u003e\n\u003cli\u003eHigh quality condenser with inner-groove copper tube and aluminum fin. \u003c\/li\u003e\n\u003cli\u003eService valves with sweat connections and easy-access gauge ports. \u003c\/li\u003e\n\u003cli\u003eFactory-installed high-pressure switch. \u003c\/li\u003e\n\u003cli\u003eAHRI certified and ETL listed. \u003c\/li\u003e\n\u003cli\u003eFilter drier included as accessory. \u003c\/li\u003e\n\u003cli\u003eCompact design allows for ease of installation, clearance, durability, and maneuverability. \u003c\/li\u003e\n\u003cli\u003ePowder-painted galvanized steel cabinet chassis. \u003c\/li\u003e\n\u003cli\u003eProtective steel louvered coil guard. \u003c\/li\u003e\n\u003cli\u003eSteel wire axial fan guard\u003c\/li\u003e\n\u003cli\u003eECM fan motor and unique blade style allowing for smooth discharge air and quieter operation.\u003c\/li\u003e\n\u003cli\u003e5-Years: Standard Parts Warranty\u003c\/li\u003e\n\u003cli\u003e10-Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe TuttoKool Air Handler offers you high quality product at an affordable price, breaking the traditional view that HVAC equipment has to be expensive.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cb\u003eStandard Features:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh heat-transfer efficiency and low static-pressure drop A-shaped coil. \u003c\/li\u003e\n\u003cli\u003eFoil-faced insulation to prevent energy loss through the cabinet. \u003c\/li\u003e\n\u003cli\u003eFactory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0 inch water column. \u003c\/li\u003e\n\u003cli\u003eMulti-stage blower Speed Control to align with varying capacity demands. \u003c\/li\u003e\n\u003cli\u003e4-position installation: Upflow, Horizontal Right, Downflow, Horizontal Left. \u003c\/li\u003e\n\u003cli\u003eHorizontal and vertical condensate drain pans standard, primary and secondary condensate fittings. \u003c\/li\u003e\n\u003cli\u003eField-installed electric heater kits 5, 7.5, 10, 15, 20 kW available as accessories.\n\u003c\/li\u003e\n\u003cli\u003eMultiple electrical entry locations. \u003c\/li\u003e\n\u003cli\u003eDual front panel, volute and coil with slide track, TXV with threaded connection for easy maintenance. \u003c\/li\u003e\n\u003cli\u003eIntegrated filter rack with toolless door access. \u003c\/li\u003e\n\u003cli\u003eEasy-to-braze copper evaporator connection. \u003c\/li\u003e\n\u003cli\u003eTXV designed for easy piston replacement. \u003c\/li\u003e\n\u003cli\u003eAll-aluminum heat exchanger extends product lifetime. \u003c\/li\u003e\n\u003cli\u003eAdvanced internal welding process to reduce potential corrosion. \u003c\/li\u003e\n\u003cli\u003eAHRI and ETL listed. \u003c\/li\u003e\n\u003cli\u003ePolymer condensate drain pan with UVC inhibitor to extends product lifetime. \u003c\/li\u003e\n\u003cli\u003eFully-insulated cabinet design. \u003c\/li\u003e\n\u003cli\u003eR454B refrigerant sensor ensures safe operation. \u003c\/li\u003e\n\u003cli\u003eR454B refrigerant sensor is factory-installed, making unit suitable for more room types and applications.\u003c\/li\u003e\n\u003cli\u003e5-Years: Standard Parts Warranty\u003c\/li\u003e\n\u003cli\u003e10-Years: After Registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"acstore","offers":[{"title":"Default Title","offer_id":50577610408001,"sku":"THP5060A1000A - T4AH4E60C000A - JAYHTR1A10BKRAA","price":4120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/7575\/3025\/files\/tk-split-ah_1_7f45674d-5f42-4e05-894e-988dc887d353.jpg?v=1790726215"}],"url":"https:\/\/acwholesalecentre.com\/collections\/heat-pump.oembed","provider":"acwholesalecentre","version":"1.0","type":"link"}